Click image to view full size image
HOOZHU Diving Video Light with MAX 4000 lumens
Product Description
1. Item No.: HV33
2. Name: Canister Diving Video Light (Canister Dive Lamp for Underwater Video)
3. LED: 4x CREE XML L2 LED(Max 4000 lm), 2x CREE XP-E-N3 Purple light(Wavelength: 395-400nm), 2x 4. Green Light LED(Watelength: 520-525nm),2x Red Light LED.
5. Four colors of light: White:4000 lm,Red:200 lm,Green:200 lm,,Purple: 6W
6. Switch 1: White: High,Low,Strobe,Close.
7. Switch 2: White,Red,Green,Purple,Close
8. Color Temperature:White(4500-5000K),
9. Beam Angle: 140 degrees
10. Burn Time: 2.0 hrs (H), 7.0 hrs(Mid), Strobe 7.0 hrs(Low)
11. Waterproof: 120 meters
12. Material: Aeronautical aluminum
13. Color: Black/Blue
14. Treatment: Hard-anodizing type III
15. Lens: 6mm clear PC
16. Battery: 26650 Li-ion Battery*2.
17. Sizes: 43mm(body dia.), 60(head dia.)mm,1630mm(L)
18. Voltage: 5.6V to 8.4V
19. Weight:1180g (w/batteries),
NOTES:
1. The Diving Light with special fixture.It would be damaged if disassembled at your own discretion.
2. Pl inspect the O-rings carefully every time you finished diving and change the broken O-rings when necessary.
3. After every diving,pl clean the flashlight body with fresh water,and store it properly after full dried.
BATTERY INSTALLATION
1.Remove the tail by turning counter-clockwise.
2.Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
3. Mount the tail by turning clockwise.DO NOT ACTIVATE IT YET.
BATTERY CHARGING
1. Plug the charger in the wall power socket, the indicator light is green in the free-load status.
2. Put the battery in the slot of the charger.
3. The indicator light is red if the batter is not fully charged; It will turn green after fully charged.
4.Take out the fully charged battery and use them in the diving light.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
CAUTION
If the light is not to be used for sometime,remove the batteries to prevent possible leakage or corrosion.Pl remove the batteries during transportation to prevent it from incorrect operation
WARRANTY: One Year
Product Description
1. Item No.: HV33
2. Name: Canister Diving Video Light (Canister Dive Lamp for Underwater Video)
3. LED: 4x CREE XML L2 LED(Max 4000 lm), 2x CREE XP-E-N3 Purple light(Wavelength: 395-400nm), 2x 4. Green Light LED(Watelength: 520-525nm),2x Red Light LED.
5. Four colors of light: White:4000 lm,Red:200 lm,Green:200 lm,,Purple: 6W
6. Switch 1: White: High,Low,Strobe,Close.
7. Switch 2: White,Red,Green,Purple,Close
8. Color Temperature:White(4500-5000K),
9. Beam Angle: 140 degrees
10. Burn Time: 2.0 hrs (H), 7.0 hrs(Mid), Strobe 7.0 hrs(Low)
11. Waterproof: 120 meters
12. Material: Aeronautical aluminum
13. Color: Black/Blue
14. Treatment: Hard-anodizing type III
15. Lens: 6mm clear PC
16. Battery: 26650 Li-ion Battery*2.
17. Sizes: 43mm(body dia.), 60(head dia.)mm,1630mm(L)
18. Voltage: 5.6V to 8.4V
19. Weight:1180g (w/batteries),
NOTES:
1. The Diving Light with special fixture.It would be damaged if disassembled at your own discretion.
2. Pl inspect the O-rings carefully every time you finished diving and change the broken O-rings when necessary.
3. After every diving,pl clean the flashlight body with fresh water,and store it properly after full dried.
BATTERY INSTALLATION
1.Remove the tail by turning counter-clockwise.
2.Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
3. Mount the tail by turning clockwise.DO NOT ACTIVATE IT YET.
BATTERY CHARGING
1. Plug the charger in the wall power socket, the indicator light is green in the free-load status.
2. Put the battery in the slot of the charger.
3. The indicator light is red if the batter is not fully charged; It will turn green after fully charged.
4.Take out the fully charged battery and use them in the diving light.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
CAUTION
If the light is not to be used for sometime,remove the batteries to prevent possible leakage or corrosion.Pl remove the batteries during transportation to prevent it from incorrect operation
WARRANTY: One Year